NO.24 ENGINE STALLS WHEN SHIFTED TO D, S, L RANGES, OR IN R POSITION

id050300815300

24

Engine stalls when shifted to D, S, L ranges, or in R position

DESCRIPTION

• Engine stalls when shifting from N or P position to D, S, L ranges or R position at idle.

POSSIBLE CAUSE

• The malfunction is on the engine control side (i.e. electronic throttle control system). Otherwise, the malfunction is in the input/turbine speed sensor (engine sometimes starts) or TCC circuit (engine always stalls).

Diagnostic procedure

STEP	INSPECTION		ACTION
1	Go to symptom troubleshooting No.10 “Low idle/stalls during deceleration”. (See NO.10 LOW IDLE/STALLS DURING DECELERATION [ZJ, ZY].) Is engine control system okay?	Yes	Repeat basic inspection and repair or replace any defective parts according to inspection result. (See BASIC INSPECTION.)
1		No	Repair or replace any defective parts according to inspection results.
2	• Verify test results. ― If okay, return to diagnostic index to service any additional symptoms. ― If malfunction remains, inspect related Service informations and perform repair or diagnosis. • If vehicle not repaired, trouble shooting completed. • If vehicle not repaired or additional diagnostic information not available, replace PCM.

24	Engine stalls when shifted to D, S, L ranges, or in R position
DESCRIPTION	• Engine stalls when shifting from N or P position to D, S, L ranges or R position at idle.
POSSIBLE CAUSE	• The malfunction is on the engine control side (i.e. electronic throttle control system). Otherwise, the malfunction is in the input/turbine speed sensor (engine sometimes starts) or TCC circuit (engine always stalls).