BASIC INSPECTION

id050300800300

STEP	INSPECTION		ACTION
1	Perform the mechanical system test. (See MECHANICAL SYSTEM TEST.) Is mechanical system okay?	Yes	Go to next step.
		No	Repair or replace any defective parts according to inspection result.
2	Turn IG SW to ON. When selector lever is moved, dose the selector illumination indicate synchronized position to lever location? Also, when other ranges are selected from N or P during idling, does vehicle moves within 1—2 s?	Yes	Go to next step.
		No	Inspect selector lever and TR switch. Repair or replace defected areas. (See AUTOMATIC TRANSAXLE SHIFT MECHANISM INSPECTION.) (See TRANSAXLE RANGE (TR) SWITCH INSPECTION.) If selector lever and TR switch are okay, go to next step.
3	Inspect ATF color and condition. (See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION.) Are ATF color and odor normal?	Yes	Go to next step.
		No	Repair or replace any defective parts according to inspection result. Flush ATX and cooler line as necessary.
4	Perform line pressure test. (See MECHANICAL SYSTEM TEST.) Is line pressure okay?	Yes	Go to next step.
		No	Repair or replace any defective parts according to inspection result.
5	Perform stall test. (See MECHANICAL SYSTEM TEST.) Is stall speed okay?	Yes	Go to next step.
		No	Repair or replace any defective parts according to inspection result.
6	Inspect the value at the following PIDs using the M-MDS. (See PCM INSPECTION [ZJ, ZY].) •  TFT •  TFT V •  VPWR •  TR •  TR SENS •  ECT •  TCS •  RPM •  APP •  TP •  TSS •  VSS Are PID values okay?	Yes	Perform symptom troubleshooting and follow procedures.
		No	Repair or replace any defective parts according to inspection result.