NETWORK TEST [MULTIPLEX COMMUNICATION SYSTEM]

id0902e6368000

Caution

•  Perform the following malfunction diagnosis according to the determination using the flowchart. (See PROCEDURES FOR DETERMINING LOCATION OF MALFUNCTION (L.H.D) [MULTIPLEX COMMUNICATION SYSTEM].) (See PROCEDURES FOR DETERMINING LOCATION OF MALFUNCTION (R.H.D) [MULTIPLEX COMMUNICATION SYSTEM].)

1.  Connect the M-MDS to the DLC-2.

am2zzw00002215

2.  After vehicle identification, the following can be selected from the M-MDS initialization screen.

•  When using an IDS (laptop PC):

1.  Select “Network Test“.

•  When using a PDS (pocket PC):

1.  Select “Vehicle Tests“.

2.  Select “Network Test“.

3.  Verify the unit with a communication error according to the directions on the screen.