DTC B1A84:51/U2100:00 [INSTRUMENT CLUSTER]

id0902e8999800

DTCs B1A84:51, U2100:00

Instrument cluster configuration not implemented
Detection Condition
Configuration setting has not been performed
Possible Causes
Instrument cluster configuration not implemented

Diagnostic Procedure

Step

Inspection

Action
1
PERFORM INSTRUMENT CLUSTER CONFIGURATION
•  Perform the instrument configuration using the M-MDS.
•  Clear the DTC.
•  Inspect the instrument cluster DTCs.
•  Are DTCs B1A84:51, U2100:00 displayed?
Yes
Replace the instrument cluster.
(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
Go to the next step.
No
DTC troubleshooting completed.
2
VERIFY THAT NO OTHER DTCs ARE RECORDED
•  Clear DTCs using the M-MDS.
•  Inspect the instrument cluster DTCs.
•  Are any other DTCs displayed?
Yes
Perform the corresponding DTC inspection.
(See DTC TABLE [INSTRUMENT CLUSTER].)
No
DTC troubleshooting completed.