DTC TABLE [INSTRUMENT CLUSTER]

id0902e8347100

DTC

Malfunction location

Reference
B10D5:13
•  Coil antenna malfunction
•  The PCM determined a malfunction in the coil antenna even though it is normal.
(See SECURITY LIGHT: 12, DTC: B10D5:13/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B10D7:05
Key ID number program error
(See SECURITY LIGHT: 13, DTC: B10D7:05/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B10D7:51
The instrument cluster has detected unprogrammed key ID number.
(See SECURITY LIGHT: 15, DTC: B10D7:51/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B10D7:81
The instrument cluster cannot read key ID number data normally.
(See SECURITY LIGHT: 14, DTC: B10D7:81/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B10D7:94
The key ID number data cannot be read.
(See SECURITY LIGHT: 13, DTC: B10D7:94/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B10D8:00
Only one key ID number is programmed.
(See SECURITY LIGHT: 21, DTC: B10D8:00/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B10D9:87
No detected communication with the coil antenna.
(See SECURITY LIGHT: 11, DTC: B10D9:87/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B10DA:51
Communication error between the instrument cluster and the PCM (data transfer failure)
(See SECURITY LIGHT: 22, DTC: B10DA:51/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B10DA:62
Communication error between the instrument cluster and the PCM (mismatched conditions)
(See SECURITY LIGHT: 23, DTC: B10DA:62/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B1A84:41
Instrument cluster configuration data error
(See DTC B1A84:41/U0300:00 [INSTRUMENT CLUSTER].)
B1A84:51
Instrument cluster configuration not implemented
(See DTC B1A84:51/U2100:00 [INSTRUMENT CLUSTER].)
B1B71:14*
Evaporator temperature sensor circuit malfunction
(See DTC B1B71:14 [INSTRUMENT CLUSTER].)
P0070:14
Ambient temperature cannot be displayed on LCD of meter
(See DTC P0070:14 [INSTRUMENT CLUSTER].)
P193B:14*
Accelerator pedal position (APP) sensor circuit malfunction
(See DTC P193B:14 [INSTRUMENT CLUSTER].)
U0001:88
Module communication error (HS-CAN)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM].)
U0100:00
PCM communication error
U0100:87
Communication error between the instrument cluster and the PCM (no response)
(See SECURITY LIGHT: 16, DTC: U0100:87/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
U0101:00
PCM communication error
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM].)
U0121:00
ABS HU/CM communication error (With ABS)
DSC HU/CM communication error (With DSC)
U0131:00
EPS control module communication error
U0140:00
BCM communication error
U0151:00
SAS control module communication error
U0214:00
Keyless control module communication error
U0300:00
Instrument cluster configuration data error
(See DTC B1A84:41/U0300:00 [INSTRUMENT CLUSTER].)
U0401:68
Signal error from PCM
(See DTC U0401:68 [INSTRUMENT CLUSTER].)
U0401:92
Signal error from PCM
(See DTC U0401:92 [INSTRUMENT CLUSTER].)
U0402:92
Signal error from PCM (HOLD indicator light illuminate signal)
(See DTC U0402:92 [INSTRUMENT CLUSTER].)
U0415:92
Signal error from ABS HU/CM (With ABS)
Signal error from DSC HU/CM (With DSC)
(See DTC U0415:92 [INSTRUMENT CLUSTER].)
U0420:92
Signal error from EPS
(See DTC U0420:92 [INSTRUMENT CLUSTER].)
U0452:68
Signal error from SAS control module
(See DTC U0452:68 [INSTRUMENT CLUSTER].)
U0452:92
Signal error from SAS control module
(See DTC U0452:92 [INSTRUMENT CLUSTER].)
U0515:68
Signal error from keyless control module
(See DTC U0515:68 [INSTRUMENT CLUSTER].)
U2100:00
Instrument cluster configuration not implemented
(See DTC B1A84:51/U2100:00 [INSTRUMENT CLUSTER].)
U3000:41
Instrument cluster internal malfunction
(See DTC U3000:41 [INSTRUMENT CLUSTER].)
U3003:16
Battery positive voltage is low
(See DTC U3003:16 [INSTRUMENT CLUSTER].)

*  :MZ-CD 1.4 DI Turbo, MZ-CD 1.6 (Y6)