DTC B1A84:41/U0300:00 [INSTRUMENT CLUSTER]

DTC B1A84:41/U0300:00 [INSTRUMENT CLUSTER]

id0902e8999900

DTCs B1A84:41, U0300:00

Instrument cluster configuration error

Detection Condition

Configuration error

Possible Causes

Configuration was not done correctly for some reason

Diagnostic Procedure

Step	Inspection		Action
1	PERFORM INSTRUMENT CLUSTER CONFIGURATION • Perform the instrument cluster configuration using the M-MDS. (See INSTRUMENT CLUSTER CONFIGURATION.) • Clear the DTC. (See CLEARING DTC [INSTRUMENT CLUSTER].) • Inspect the instrument cluster DTCs. (See DTC INSPECTION [INSTRUMENT CLUSTER].) • Are DTCs B1A84:41, U0300:00 displayed?	Yes	Replace the instrument cluster. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.) Go to the next step.
1		No	DTC troubleshooting completed.
2	VERIFY THAT NO OTHER DTCs ARE RECORDED • Clear DTCs using the M-MDS. (See CLEARING DTC [INSTRUMENT CLUSTER].) • Inspect the instrument cluster DTCs. (See DTC INSPECTION [INSTRUMENT CLUSTER].) • Are any other DTCs displayed?	Yes	Perform the corresponding DTC inspection. (See DTC TABLE [INSTRUMENT CLUSTER].)
2		No	DTC troubleshooting completed.