SOLENOID VALVE INSPECTION [DJVA-EL]

id051901287000

Caution
•  Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects ON the connector when disconnecting it.

On-vehicle inspection

1.  Disconnect the negative battery cable.

2.  Disconnect the coupler component connector.

am3zzw00008276

3.  Inspect the solenoid valve using a tester.

am2zzw00004307

•  If there is any malfunction, replace the CVT. (See CVT (CONTINUOUSLY VARIABLE TRANSAXLE) REMOVAL/INSTALLATION [DJVA-EL].)

Solenoid valve specification

CVT fluid temperature: 20 °C

Solenoid valve

Terminal

Resistance (ohm)
Shift control solenoid No.1
H—ground
11—15
Shift control solenoid No.2
G—ground
11—15
TCC engage solenoid
I—ground
11—15
TCC solenoid
J—ground
11—15
Belt grip pressure linear solenoid
E—F
5.0—5.6