OIL COOLER REMOVAL/INSTALLATION [DJVA-EL]

id051901287700

1.  Drain the CVT fluid. (See CVT (CONTINUOUSLY VARIABLE TRANSAXLE) FLUID REPLACEMENT [DJVA-EL].)

2.  Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT [MZR 1.3, MZR 1.5].)

3.  Disconnect the water hose from oil cooler.

4.  Remove the oil cooler.

(1)  Remove the oil cooler from the CVT.

adejjw00002821

(2)  Remove the O-ring from the oil cooler.

5.  Install the oil cooler.

(1)  Coat a new O-ring with CVT fluid, and install it to the oil cooler.

adejjw00003182

(2)  Install the oil cooler to the CVT.

adejjw00002823

Tightening torque

17—25 N·m {1.8—2.5 kgf·m, 13—18 ft·lbf}

6.  Connect the water hose to oil cooler.

7.  Add the engine coolant. (See ENGINE COOLANT REPLACEMENT [MZR 1.3, MZR 1.5].)

8.  Adjust the CVT fluid level. (See CVT (CONTINUOUSLY VARIABLE TRANSAXLE) FLUID REPLACEMENT [DJVA-EL].)