DTC U3000:05/U3000:41/U3000:43/U3000:46/U3000:49/U3000:61/U3000:96

id060200802900

DTC	U3000:05/U3000:41/U3000:43/U3000:46/U3000:49/U3000:61/U300096		EPS CM
DETECTION CONDITION		•  U3000:05 ―  Malfunction in internal system program of EPS CM •  U3000:41 ―  Check sum error in internal memory of EPS CM •  U3000:43 ―  Special memory malfunction in EPS CM •  U3000:46 ―  Data memory malfunction in EPS CM •  U3000:49 ―  Malfunction detected in internal circuit of EPS CM •  U3000:61 ―  Error in EPS CM calculation •  U3000:96 ―  Malfunction detected in internal circuit of EPS CM component part
POSSIBLE CAUSE		•  Internal malfunction of EPS CM

Diagnostic Procedure

Step	Inspection		Action
1	VERIFY DTC •  Clear the DTC from the memory. (See ELECTRIC POWER STEERING (EPS) ON-BOARD DIAGNOSIS.) •  Verify if any DTCs are displayed. (See ELECTRIC POWER STEERING (EPS) ON-BOARD DIAGNOSIS.) •  Is the same DTC present?	Yes	Replace the steering column. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [L.H.D.].) (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [R.H.D.].)
		No	Go to the next step.
2	VERIFY THAT NO OTHER DTCs ARE PRESENT •  Are any other DTCs output? (See ELECTRIC POWER STEERING (EPS) ON-BOARD DIAGNOSIS.)	Yes	Go to the applicable DTC inspection. (See ELECTRIC POWER STEERING (EPS) ON-BOARD DIAGNOSIS.)
		No	DTC troubleshooting completed.