NO.7 NO COOL AIR [MANUAL AIR CONDITIONER]


id0702c2812600

7
No cool air
DESCRIPTION
•  Magnetic clutch does not operate.
POSSIBLE CAUSE
•  A/C relay power supply circuit malfunction
•  Evaporator temperature sensor signal circuit malfunction
•  Evaporator temperature sensor characteristic malfunction
•  A/C compressor malfunction

Diagnostic procedure

STEP

INSPECTION

ACTION

1
INSPECT AIR BLOW OUT
•  Does air blow out?
Yes
Go to the next step.
No
Go to Step 1 of troubleshooting indexes No.1 and 2.
2
INSPECT FUSE
•  Are the A/C relay power supply fuses normal?
Yes
Go to the next step.
No
Replace the fuse, then go to Step 6. If fuse burns out immediately, go to the next step.
3
CHECK TO SEE WHETHER MALFUNCTION IN EVAPORATOR TEMPERATURE SIGNAL CIRCUIT OR ELSEWHERE
•  Retrieve the PCM (MZR 1.3, MZR 1.5) and instrument cluster (MZ-CD 1.6) DTC using the M-MDS.
•  Are there following DTC displayed?
MZR 1.3, MZR 1.5:
―  PCM DTC P0537:00, P0538:00
MZ-CD 1.6:
―  Instrument cluster DTC B1B71:14
Yes
Go to applicable DTC inspection.
No
Go to the next step.
4
INSPECT EVAPORATOR TEMPERATURE SENSOR
•  Inspect the evaporator temperature sensor.
•  Is it normal?
Yes
Go to the next step.
No
Replace the evaporator temperature sensor, then go to Step 6.
5
INSPECT A/C COMPRESSOR OPERATION
•  Start the engine.
•  Turn the A/C switch and fan switch on.
•  Does the A/C compressor operate?
Yes
Go to Step 1 of troubleshooting index No.6.
No
Go to the next step.
6
CONFIRM THAT MALFUNCTION SYMPTOMS DO NOT RECUR AFTER REPAIR
•  Does cool air blow out? (Are the results of refrigerant system performance test normal?)
Yes
Troubleshooting completed. Explain repairs to customer.
No
Recheck malfunction symptoms, then repeat from Step 1 if the malfunction recurs.