NO.5 CANNOT PRESET (PRESET FUNCTION DOES NOT OPERATE) [RADIO]
id0903e3804700
|
5 |
Cannot preset (preset function does not operate) |
|---|---|
|
Possible DTC |
— |
|
POSSIBLE CAUSE
|
• Audio unit malfunction
• Center panel malfunction
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
• Tune to the desired station and press channel preset switch 1 for about 2 s to store it.
• Repeat the above for other stations using channel preset switch 2 to 5.
• Press channel preset switch 1 to 6 one by one.
• Are the stored stations present?
|
Yes
|
Go to the next step.
|
|
No
|
Go to Step 3.
|
||
|
2
|
• Switch the ignition to off and then to ACC.
• Check if the preset stations are stored by pressing the preset switch.
• Are the stations stored?
|
Yes
|
The system is normal. (Explain preset procedure to customer using Owner’s Manual)
|
|
No
|
Replace the audio unit.
|
||
|
3
|
• Remove the center panel from the audio unit, and reinstall the center panel to the audio unit.
• Activate the audio switch inspection mode.
• Does the buzzer sound when a switch is pressed?
|
Yes
|
Replace the audio unit.
|
|
No
|
Replace the center panel.
|
||