DOOR SASH FILM REMOVAL

id091600445500

1.  Partially peel back the glass run channel.

2.  Partially peel back the door weatherstrip.

3.  Remove the following parts:

(1)  Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION.)

(2)  Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

(3)  Power outer mirror (See POWER OUTER MIRROR REMOVAL/INSTALLATION.)

(4)  Sail inner garnish (See SAIL INNER GARNISH REMOVAL/INSTALLATION.)

(5)  Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION.)

(6)  Front beltline molding (See FRONT BELTLINE MOLDING REMOVAL/INSTALLATION.)

(7)  Rear beltline molding (See REAR BELTLINE MOLDING REMOVAL/INSTALLATION.)

(8)  Rear door garnish (See REAR DOOR GARNISH REMOVAL/INSTALLATION.)

4.  Peel off the door sash film by pulling it outward from one end.

am2zzw00001921

Note

•  Slowly remove the door sash film because it could tear easily.