C-PILLAR TRIM REMOVAL/INSTALLATION [3HB]

id0917004591z3

1.  Remove the following parts:

(1)  Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION)

(2)  Rear seat back (See REAR SEAT BACK REMOVAL/INSTALLATION)

(3)  Lower anchor installation bolts of the rear seat belt (See REAR SEAT BELT REMOVAL/INSTALLATION)

(4)  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION)

2.  Partially peel back the seaming welt.

3.  Remove the trunk side trim. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION [3HB])

4.  Pull the C-pillar trim in the direction of the arrow shown in the figure and remove it while detaching tab A, clips B, pin C, pin D and tab E.

am2zzw00003416

5.  Pull out the rear seat belt lower anchor and remove the C-pillar trim.

6.  Install in the reverse order of removal.