RELAY INSPECTION

id092100800300

Relay Type

Connector type	Part name
Type A	•  Windshield wiper de-icer relay •  Main relay •  Ig1 relay No.1 •  Ig1 relay No.2 •  Cooling fan relay No.2 •  Cooling fan relay No.2 •  Starter relay •  ACC relay •  Rear window defogger relay •  Horn relay •  Sub relay •  Fuel pump relay •  Electric variable valve timing relay •  A/C relay •  Electric at oil pump relay/ •  Cooling fan relay No.1/ •  Cooling fan relay No.2/
Type B	•  Blower relay

Type A

1.  Remove the relay.

(See RELAY LOCATION [(E)].)

2.  Verify the continuity between relay terminals C and D.

am3uuw00014873

•  If it can be verified, replace the relay.

(See RELAY LOCATION [(E)].)

•  If it cannot be verified, go to the next step.

3.  Verify the continuity between relay terminals E and A.

•  If it can be verified, go to the next step.

•  If it cannot be verified, replace the relay.

(See RELAY LOCATION [(E)].)

4.  Apply battery voltage to relay terminal E, and connect terminal A to ground.

5.  Verify the continuity between relay terminals C and D.

•  If it cannot be verified, replace the relay.

(See RELAY LOCATION [(E)].)

Type B

1.  Remove the relay.

(See RELAY LOCATION [(E)].)

2.  Verify the continuity between the relay terminals C and A.

am3uuw00014875

•  If it can be verified, replace the relay.

(See RELAY LOCATION [(E)].)

•  If it cannot be verified, go to the next step.

3.  Verify the continuity between the relay terminals D and B.

•  If it can be verified, go to the next step.

•  If it cannot be verified, replace the relay.

(See RELAY LOCATION [(E)].)

4.  Apply battery voltage to relay terminal D, and connect terminal B to ground.

5.  Verify the continuity between relay terminals C and A.

•  If it cannot be verified, replace the relay.

(See RELAY LOCATION [(E)].)