THROTTLE BODY INSPECTION [MZR 2.0 DISI i-stop]

id0113b8802600


Resistance Inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

2.  Disconnect the negative battery cable.

3.  Disconnect the throttle body connector.

4.  Measure the resistance between throttle body terminals E and F.

am3zzw00007748

Throttle body resistance
0.3—100 ohms [20°C {68 °F}]
•  If not as specified, replace the throttle body. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)