AIR FUEL RATIO (A/F) SENSOR REMOVAL/INSTALLATION [L3 Turbo]

id0140b6899700

Warning

•  A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3 Turbo].)

2.  Disconnect the negative battery cable.

3.  Remove the charge air cooler. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L3 Turbo].)

4.  Remove the charge air cooler bracket. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L3 Turbo].)

5.  Disconnect the A/F sensor connector.

6.  Remove the A/F sensor using the SST.

am3uuw00005963

7.  Install in the reverse order of removal.