ENGINE COOLANT TEMPERATURE (ECT) SENSOR REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop]

id0140j1801900

Warning

•  A hot engine can cause severe burns. Turn off the engine and wait until it is cool before removing the ECT sensor.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

2.  Disconnect the negative battery cable.

3.  Remove the battery tray (side). (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

4.  Disconnect the ECT sensor connector.

5.  Remove the ECT sensor using the SST.

am3zzw00007864

6.  Install in the reverse order of removal.

7.  Refill the engine coolant. (SeeENGINE COOLANT REPLACEMENT [MZR 2.0 DISI i-stop].)