INTAKE AIR TEMPERATURE (IAT) SENSOR INSPECTION [MZR 2.0 DISI i-stop]

id0140j1802200

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

2.  Disconnect the negative battery cable.

3.  Disconnect the MAF/IAT sensor connector.

4.  Measure the resistance between the MAF/IAT sensor terminals D and E using an ohmmeter.

am6zzw00000818

•  If not as specified, replace the MAF/IAT sensor.
(See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

IAT sensor Specification

Ambient temperature (°C {°F})

Resistance (kilohm)
20{68}
2.21—2.69
60{140}
0.493—0.667