i-stop OFF SWITCH INSPECTION [MZR 2.0 DISI i-stop]

id0140j1888900

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

2.  Disconnect the negative battery cable.

3.  Remove the i-stop OFF switch. (See i-stop OFF SWITCH REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

4.  Verify that the continuity between the i-stop OFF switch terminals is as indicated in the table.

am3zzw00007844

am3zzw00007845

•  If not as indicated in the table, replace the i-stop OFF switch. (See i-stop OFF SWITCH REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

am3zzw00007846

am3zzw00007847

5.  Apply battery positive voltage to i-stop OFF switch terminal E, and connect terminal A to ground.

6.  Verify that the LED illuminates.

•  If there is any malfunction, replace the i-stop OFF switch. (See i-stop OFF SWITCH REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)