BRAKE SWITCH INSPECTION

id041100801900

Except MZ-CD 1.6 (Y6) (Applied VIN (assumed): JMZ BL1*Y20# 100001—151064)

Caution

•  Inspect the brake switch with it installed to the brake pedal, otherwise the brake switch may not operate normally. If the brake switch is removed from the brake pedal, replace the brake switch with a new one.

1.  For L.H.D., remove the dashboard under cover. (if equipped) (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

2.  For R.H.D., remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION.)

3.  Disconnect the brake switch connector.

4.  Verify that the continuity is as indicated in the table.

am3zzw00009606

•  If not as indicated in the table, replace the brake switch. (See BRAKE PEDAL REMOVAL/INSTALLATION [L.H.D.].) (See BRAKE PEDAL REMOVAL/INSTALLATION [R.H.D.].)

am3zzw00009688

MZ-CD 1.6 (Y6) (Applied VIN (assumed): JMZ BL1*Y20# 100001—151064)

Caution

•  Inspect the brake switch with it installed to the brake pedal, otherwise the brake switch may not operate normally. If the brake switch is removed from the brake pedal, replace the brake switch with a new one.

1.  For L.H.D., remove the dashboard under cover. (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

2.  For R.H.D., remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION.)

3.  Disconnect the brake switch connector.

4.  Verify that the continuity is as indicated in the table.

am3zzw00009610

•  If not as indicated in the table, replace the brake switch. (See BRAKE PEDAL REMOVAL/INSTALLATION [L.H.D.].) (See BRAKE PEDAL REMOVAL/INSTALLATION [R.H.D.].)

am3zzw00009611