TRANSAXLE OIL INSPECTION [J65M-R]


id0515c1800000

1.  Park the vehicle on level ground.

2.  Remove the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

3.  Remove the oil level plug.

4.  Verify that the oil level is in agreement with the bottom end of the plug port.

am3zzw00006962

•  If the oil level is lower than the bottom end of the plug port, add the specified amount and type of oil through the oil level plug hole.
Manual transaxle oil type
WSS-M2C200-D2

5.  Install the oil level plug.

Tightening torque
29—41 N·m {3.0—4.1 kgf·m, 22—30 ft·lbf}

6.  Install the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)