NEUTRAL SWITCH REMOVAL/INSTALLATION [G66M-R (EXCEPT MZR 2.0 DISI i-stop)]

id0515k18007k3

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L5].)

2.  Disconnect the negative battery cable.

3.  Remove the battery component. (ex: battery, battery tray and PCM component) (See BATTERY REMOVAL/INSTALLATION [LF, L5].)

4.  Remove the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

5.  Drain the oil from the transaxle. (See TRANSAXLE OIL REPLACEMENT [G66M-R].)

6.  Remove the neutral switch.

am3uuw00002139

7.  Install the neutral switch (with a new gasket) to the transaxle case.

Tightening torque
20—29 N·m {2.1—2.9 kgf·m, 15—21 ft·lbf}

8.  Install the battery component. (ex: battery, battery tray and PCM component)(See BATTERY REMOVAL/INSTALLATION [LF, L5].)

9.  Install the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L5].)

10.  Add the specified amount and type of oil. (See TRANSAXLE OIL REPLACEMENT [G66M-R].)

11.  Install the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)