TRANSAXLE OIL INSPECTION [A26M-R]

id0515l1800000

1. Park the vehicle on level ground.

2. Remove the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

3. Remove the oil level plug and washer.

am3zzw00005451

4. Verify that the oil is near the brim of the plug port.

• If the oil level is low, add the specified amount and type of oil through the filler plug hole.

Manual transaxle oil grade

API service GL‐4

Manual transaxle oil viscosity

SAE 75W-80

5. Tighten the oil level plug with a new washer.

Tightening torque

28—50 N·m {2.9—5.1 kgf·m, 21—37 ft·lbf}

6. Install the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)