DTC U0533:68 [INSTRUMENT CLUSTER]
id0902e8509900
|
DESCRIPTION |
Erratic signal from rear vehicle monitoring control module |
|---|---|
|
DETECTION CONDITION
|
• Instrument cluster receives the erratic data from rear vehicle monitoring control module when the ignition is ON.
|
|
POSSIBLE CAUSE
|
• Rear vehicle monitoring system DTC is stored
• Rear vehicle monitoring control module malfunction
• Instrument cluster malfunction
|
Diagnostic Procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
CONFIRM REAR VEHICLE MONITORING SYSTEM DSC
• Perform the “DTC INSPECTION” to confirm the rear vehicle monitoring system DTC.
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
2
|
CONFIRM INSTRUMENT CLUSTER DTC
• Clear the DTC from the instrument cluster using the M-MDS.
• Switch the ignition to ON and wait for 20 s or more.
• Drive the vehicle at speed of 30 km/h {19 mph} or more.
• Perform the “DTC INSPECTION” to confirm the instrument cluster DTC.
• Is the same DTC present?
|
Yes
|
Replace the rear vehicle monitoring control module, then go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
3
|
VERIFY TROUBLESHOOTING COMPLETED
• Clear the DTC from the instrument cluster using the M-MDS.
• Switch the ignition to ON and wait for 20 s or more.
• Drive the vehicle at speed of 30 km/h {19 mph} or more.
• Perform the “DTC INSPECTION” to confirm the instrument cluster DTC.
• Is the same DTC present?
|
Yes
|
Replace the instrument cluster, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||