DTC B1A84:51/U2100:00 [INSTRUMENT CLUSTER]

id0902e8999800

DESCRIPTION

Configuration error
DETECTION CONDITION
•  Instrument cluster detects the erratic configuration data when the ignition is ON.
POSSIBLE CAUSE
•  Instrument cluster configuration not implemented
•  Instrument cluster malfunction

Diagnostic Procedure

STEP

INSPECTION

ACTION
1
PERFORM INSTRUMENT CLUSTER CONFIGURATION
•  Perform the “INSTRUMENT CLUSTER CONFIGURATION” using the M-MDS.
•  Clear the DTC from the instrument cluster using the M-MDS.
•  Switch the ignition to ON.
•  Perform the “DTC INSPECTION”.
•  Is the same DTC present?
Yes
Perform the “INSTRUMENT CLUSTER CONFIGURATION” again, then go to the next step.
(See INSTRUMENT CLUSTER CONFIGURATION.)
No
Go to Step 3.
2
VERIFY TROUBLESHOOTING COMPLETED
•  Clear the DTC from the instrument cluster using the M-MDS.
•  Switch the ignition to ON.
•  Perform the “DTC INSPECTION”.
•  Is the same DTC present?
Yes
Replace the instrument cluster, then go to the next step.
(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
No
Go to the next step.
3
VERIFY THAT NO OTHER DTCs ARE PRESENT
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [INSTRUMENT CLUSTER].)
No
DTC troubleshooting completed.