PERSONALIZATION FEATURES SETTING PROCEDURE

id091400515500

Advanced Keyless Entry And Push Button Start System

Note

•  Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the CUSTOMIZED FUNCTION SETTING PROCEDURE.

1.  Connect the M-MDS to the DLC-2.

am3zzw00006174

2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

1.  Select “Module Programming”.

3.  Then, select items from the screen menu in the following order.

1.  Select “Programmable Parameters”.

2.  Select “RKE”.

4.  Select the item name, and then select option.

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting content	Control unit
Advanced keyless function	Advanced keyless entry and push button start system function can be set to inoperable.	Enabled	Disabled/ Enabled	Keyless control module
Advanced key battery low warning	Advanced key remaining battery level/battery dead warning can be set.	Enabled	Disabled/ Enabled	Keyless control module
Auto Lock	Auto lock function can be set.	Disabled	Disabled/ Enabled	Keyless control module
Auto relock timer (with AKE)	Auto re-lock operation timing can be changed.	30 s	30s/ 60s/ 90s	Keyless control module
Answer back buzzer volume	Volume adjustment of the answer back buzzer can be set.	8	Disabled/ 1-10	Keyless control module
Warning buzzer volume	Volume adjustment of the warning buzzer can be set.	8	1-10	Keyless control module
Super lock (with AKE)	Super lock can be set to inoperable.	Two times to lock	Disabled/ Two times to lock/ One time to lock	Keyless control module

Keyless Entry Start System