STEERING ANGLE SENSOR REMOVAL/INSTALLATION

id091800813600

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Driver-side air bag module (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)

(2)  Steering wheel (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITHOUT ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].) (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITH ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)

(3)  Clock spring (See CLOCK SPRING REMOVAL/INSTALLATION.)

3.  Remove the steering angle sensor.

am3uuw00004496

4.  Install in the reverse order of removal.