ACCESSORY SOCKET INSPECTION

id092000800500

Front

1.  Disconnect the negative battery cable.

2.  Remove the upper panel. (See UPPER PANEL REMOVAL/INSTALLATION.)

3.  Remove the shift knob. (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

4.  Remove the selector lever knob. (ATX/CVT) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.) (See CVT (CONTINUOUSLY VARIABLE TRANSAXLE) SHIFT MECHANISM REMOVAL/INSTALLATION.)

5.  Remove the shift panel. (See SHIFT PANEL REMOVAL/INSTALLATION.)

6.  Remove the accessory socket (Front). (See ACCESSORY SOCKET REMOVAL/INSTALLATION.)

7.  Connect a tester as shown in the figure and verify that there is continuity.

am6zzw00002056

•  If the continuity cannot be verified, replace the accessory socket (Front).

Rear

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)

(2)  Shift knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

(3)  Selector lever knob (ATX/CVT) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.) (See CVT (CONTINUOUSLY VARIABLE TRANSAXLE) SHIFT MECHANISM REMOVAL/INSTALLATION.)

(4)  Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)

(5)  Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(6)  Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(7)  Audio unit (See AUDIO UNIT REMOVAL/INSTALLATION.)

(8)  Console (See CONSOLE REMOVAL/INSTALLATION.)

(9)  Accessory socket (Rear) (See ACCESSORY SOCKET REMOVAL/INSTALLATION.)

3.  Connect a tester as shown in the figure and verify that there is continuity.

am6zzw00002056

•  If the continuity cannot be verified, replace the accessory socket (Rear).