REAR VEHICLE MONITORING BRACKET REMOVAL/INSTALLATION

id092200198900

1.  Disconnect the negative battery cable.

2.  Remove the rear combination light. (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION.)

3.  Remove the rear bumper. (See REAR BUMPER REMOVAL/INSTALLATION.)

4.  Remove the rear vehicle monitoring control module. (See REAR VEHICLE MONITORING CONTROL MODULE REMOVAL/INSTALLATION.)

5.  Remove the nuts.

am3zzw00006179

6.  Remove the rear vehicle monitoring bracket.

7.  Install in the reverse order of removal.

8.  Perform radar aiming. (See REAR VEHICLE MONITORING RADAR AIMING.)