PARKING SENSOR CONTROL MODULE REMOVAL/INSTALLATION

id092200775400

Removal

1.  Disconnect the negative battery cable.

2.  Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

3.  Remove the lower panel. (Passenger-side) (See LOWER PANEL REMOVAL/INSTALLATION.)

4.  Disconnect the connector.

am3zzw00006129

5.  Remove the nut.

am3zzw00006130

6.  Remove the parking sensor control module.

Installation

1.  Install the parking sensor control module to the dashboard frame as shown in the figure.

am3zzw00006131

2.  Connect the parking sensor control module hook to the dash board frame and tighten the nut as shown in the figure.

am3zzw00006132

3.  Connect the parking sensor connector.

4.  Install the lower panel. (Passenger-side) (See LOWER PANEL REMOVAL/INSTALLATION.)

5.  Install the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

6.  Connect the negative battery cable.