NO.25 A/C IS NOT CUT OFF UNDER WIDE OPEN THROTTLE CONDITIONS [ZJ, ZY, Z6]

id0103b1803100

Without Throttle Valve Actuator

25

A/C IS NOT CUT OFF UNDER WOT CONDITIONS.

DESCRIPTION

The A/C compressor magnetic clutch does not disengage under WOT.

POSSIBLE CAUSE

•  TP sensor malfunction

•  TP sensor misadjustment

•  Loosely installed TP sensor

25	A/C IS NOT CUT OFF UNDER WOT CONDITIONS.
DESCRIPTION	The A/C compressor magnetic clutch does not disengage under WOT.
POSSIBLE CAUSE	• TP sensor malfunction • TP sensor misadjustment • Loosely installed TP sensor

Diagnostic procedure

STEP	INSPECTION	RESULTS	ACTION
1	Does the A/C compressor disengage when the A/C switch is turned off?	Yes	Go to the next step.
1		No	Go to symptom troubleshooting "No.24 A/C is always on or A/C compressor runs continuously". (See NO.24 A/C IS ALWAYS ON OR A/C COMPRESSOR RUNS CONTINUOUSLY[ZJ, ZY, Z6].)
2	Connect M-MDS to DLC-2. Retrieve any continuous memory, KOEO and KOER DTCs using M-MDS. Are there any DTCs displayed?	Yes	DTC is displayed: Go to the appropriate DTC inspection. (See DTC TABLE[ZJ, ZY, Z6].)
2		No	No DTC is displayed: Inspect the TP sensor for proper adjustment.
3	Verify test results. • If normal, return to diagnostic index to service any additional symptoms. (See SYMPTOM DIAGNOSTIC INDEX [ZJ, ZY, Z6].) • If malfunction remains, inspect related Service information perform repair or diagnosis. ― If vehicle repaired, troubleshooting completed. ― If vehicle not repaired or additional diagnostic information not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [ZJ, ZY, Z6].)

With Throttle Valve Actuator

25

A/C IS NOT CUT OFF UNDER WOT CONDITIONS.

DESCRIPTION

The A/C compressor magnetic clutch does not disengage under WOT.

POSSIBLE CAUSE

•  Accelerator pedal position (APP) sensor malfunction

•  APP sensor misadjustment

•  Loosely installed TP sensor

25	A/C IS NOT CUT OFF UNDER WOT CONDITIONS.
DESCRIPTION	The A/C compressor magnetic clutch does not disengage under WOT.
POSSIBLE CAUSE	• Accelerator pedal position (APP) sensor malfunction • APP sensor misadjustment • Loosely installed TP sensor

Diagnostic procedure

STEP	INSPECTION	RESULTS	ACTION
1	Does the A/C compressor disengage when the A/C switch is turned off?	Yes	Go to the next step.
1		No	Go to symptom troubleshooting "No.24 A/C is always on or A/C compressor runs continuously". (See NO.24 A/C IS ALWAYS ON OR A/C COMPRESSOR RUNS CONTINUOUSLY[ZJ, ZY, Z6].)
2	Connect M-MDS to DLC-2. Retrieve any continuous memory, KOEO and KOER DTCs using M-MDS. Are there any DTCs displayed?	Yes	DTC is displayed: Go to the appropriate DTC inspection. (See DTC TABLE[ZJ, ZY, Z6].)
2		No	No DTC is displayed: Inspect the APP sensor.
3	Verify test results. • If normal, return to diagnostic index to service any additional symptoms. (See SYMPTOM DIAGNOSTIC INDEX [ZJ, ZY, Z6].) • If malfunction remains, inspect related Service information perform repair or diagnosis. ― If vehicle repaired, troubleshooting completed. ― If vehicle not repaired or additional diagnostic information not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [ZJ, ZY, Z6].)