VARIABLE INTAKE AIR SOLENOID VALVE INSPECTION[LF, L3]

id0113b3802800

1.  Remove the variable intake air solenoid valve. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION[LF, L3].)

2.  Inspect airflow between the ports under the following conditions.

•  If not as specified, replace the variable intake air solenoid valve. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION[LF, L3].)

•  If as specified, carry out the “Circuit Open/Short Inspection”.

am3zzw00000115

LF

am3zzw00000116

L3

am3zzw00003208

Circuit Open/Short Inspection

1.  Disconnect the PCM connector. (See PCM REMOVAL/INSTALLATION[LF, L3].)

2.  Inspect the following wiring harness for open or short (continuity check).

am3zzw00000117

am3zzw00002508

am3zzw00001810

Open circuit

•  If there is no continuity, the circuit is open. Repair or replace the wiring harness.

―  Variable intake air solenoid valve terminal A and PCM terminal 2J^*1, 2AJ^*2

―  Variable intake air solenoid valve terminal B and main relay terminal A

Short circuit

•  If there is continuity, the circuit is shorted. Repair or replace the wiring harness.

―  Variable intake air solenoid valve terminal A and power supply

―  Variable intake air solenoid valve terminal A and body ground

―  Variable intake air solenoid valve terminal B and body ground