SPARK PLUG REMOVAL/INSTALLATION[LF, L3]

id0118b2800400

Caution

•  If a spark plug that is not as specified is installed, sealing performance will be deteriorated. Install only the specified spark plug when replacing.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION[LF, L3].)

2.  Disconnect the negative battery cable.

3.  Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION[LF, L3].)

4.  Remove the ignition coil. (See IGNITION COIL REMOVAL/INSTALLATION[LF, L3].)

5.  Remove the spark plugs using a plug-wrench.

6.  Install in the reverse order of removal.