MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REMOVAL/INSTALLATION[ZJ, ZY, Z6]

id0140b1805500

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION[ZJ, ZY, Z6].)

2.  Disconnect the negative battery cable.

3.  Perform the following procedure for easier access

(1)  Remove the battery box. (See BATTERY REMOVAL/INSTALLATION[ZJ, ZY, Z6].)

4.  Remove the MAF/IAT sensor.

am3zzw00002527

5.  Install in the reverse order of removal.

MAF/IAT sensor tightening torque
0.55—0.82 N·m {5.7—8.3 kgf·cm, 4.9—7.2 in·lbf}