NO.2 VEHICLE MOVES IN N POSITION[FS5A-EL]

id050308800700

2

Vehicle moves in N position

DESCRIPTION

•  Vehicle creeps in N position.

•  Vehicle creeps if brake pedal is not depressed in N position.

POSSIBLE CAUSE

•  If the vehicle moves in N position, basically, the malfunction is in the ATX. Since a malfunction in the sensor circuit or output circuit is the cause of the malfunction in the ATX, inspect the sensors, output circuit, and the related wiring harnesses.

1.  Clutch burnt (Forward clutch)

•  Control valve body malfunction

2.  Selector lever position disparity (Although the selector indicator shows N position, the hydraulic circuit shows D range or R position)

Note

•  Before following the troubleshooting steps, make sure that the Automatic Transaxle On-Board Diagnostic and Automatic Transaxle Basic Inspection are conducted.

Diagnostic procedure

STEP	INSPECTION		ACTION
1	Does the vehicle creep when the selector lever is moved slightly in N position?	Yes	Go to the next step.
1		No	Adjust the selector lever. (See SELECTOR CABLE ADJUSTMENT.)
2	Disconnect the TCM connector. Is the resistance between the ground terminal at the TCM connector and the body ground less than 5.0 ohms?	Yes	Go to the next step.
2		No	Repair open ground circuit. Reconnect the TCM.
3	Inspect the value at the following TCM PID using the M-MDS. (See TCM INSPECTION[FS5A-EL].) • LPS Is the LPS PID value normal?	Yes	Overhaul the control valve body and repair or replace any malfunctioning parts. (See ATX workshop manual [FS5A-EL].) If any problem remains, overhaul the transaxle and repair or replace any malfunctioning parts. (See ATX workshop manual [FS5A-EL].)
3		No	Repair or replace any malfunctioning parts.
4	• Verify the test results. ― If normal, return to the diagnostic index to service any additional symptoms. ― If the malfunction remains, inspect the related Service information and perform repair or diagnosis. • If the vehicle is repaired, troubleshooting is completed. • If the vehicle is not repaired or additional diagnostic information is not available, replace the TCM.