SOLENOID VALVE REMOVAL/INSTALLATION (SECONDARY CONTROL VALVE BODY)[FS5A-EL]

id051721808000

1.  Remove the battery duct and battery cover. (See BATTERY REMOVAL/INSTALLATION[LF, L3].)

2.  Disconnect the negative battery cable.

3.  Remove the battery, battery box and battery tray. (See BATTERY REMOVAL/INSTALLATION[LF, L3].)

4.  Remove the under cover.

5.  Drain the ATF.

6.  Remove the oil cover.

7.  Remove the secondary control valve body. (See SECONDARY CONTROL VALVE BODY REMOVAL[FS5A-EL].)

8.  Remove the bracket.

am3zzw00003462

9.  Remove the solenoid valve(s).

am3zzw00003585

10.  Apply ATF to a new O‐ring and install it on the solenoid valve.

11.  Install the solenoid valve in the secondary control valve body.

Tightening torque
7.8—10.8 N·m
{80—110 kgf·cm, 70—95.4 in·lbf}

12.  Install the secondary control valve body. (See SECONDARY CONTROL VALVE BODY REMOVAL[FS5A-EL].)

13.  Install the oil cover. (See SECONDARY CONTROL VALVE BODY REMOVAL[FS5A-EL].)

14.  Install the under cover.

15.  Install the battery, battery box and battery tray. (See BATTERY REMOVAL/INSTALLATION[LF, L3].)

16.  Connect the negative battery cable.

17.  Install the battery duct and battery cover. (See BATTERY REMOVAL/INSTALLATION[LF, L3].)

18.  Add ATF. (See AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT[FS5A-EL].)

19.  Perform the mechanical system test. (See MECHANICAL SYSTEM TEST[FS5A-EL].)

20.  Perform the road test. (See ROAD TEST[FS5A-EL].)