STEP
INSPECTION
ACTION
1
• Inspect the air mix actuator. (See AIR MIX ACTUATOR INSPECTION.)
• Is it normal?
Yes
Go to the next step.
No
Replace the air mix actuator. (See AIR MIX ACTUATOR REMOVAL/INSTALLATION.)
2
• Disconnect the climate control unit connector and the air mix actuator connector.
• Is there an open circuit in the wiring harness between the following terminals of the climate control unit and the air mix actuator?
-
― Climate control unit terminal P—air mix actuator terminal A― Climate control unit terminal N—air mix actuator terminal C― Climate control unit terminal U—air mix actuator terminal B
Yes
Repair the wiring harness.
No
Go to the next step.
3
• Is there a short circuit to ground in the wiring harness between climate control unit terminal N and air mix actuator terminal C?
Yes
Repair the wiring harness.
No
The system is normal at present. (Clear the past malfunction from the memory.)
