DTC DISPLAY

id070200801500

1.  Connect the M-MDS to the DLC-2 connector.

am3zzw00000457

2.  Shine a 60 W incandescent light from a distance of approx. 100 mm {3.9 in}directly onto the solar radiation sensor.

Note

•  If incandescent light is not shone on the solar radiation sensor, the climate control unit determines a malfunction and indicates DTC “B1260, B1261”.

3.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

•  When using the IDS (laptop PC)

―  Select the “Toolbox” tab.

―  Select the “Self Test”.

―  Select the “Modules”.

―  Select the “EATC”.

•  When using the PDS (Pocket PC)

―  Select “Module Tests”.

―  Select the “Optional” tab.

―  Select the “EATC”.

―  Select the “Self Test”.

4.  Verify the DTC according to the directions on the screen.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

5.  After completion of repairs, clear all DTCs stored in the climate control unit. (See CLEARING DTC.)