MAGNETIC CLUTCH DISASSEMBLY/ASSEMBLY[LF, L3]

id0740008004c2

1. Disassemble in the order indicated in the table.

am3zzw00000805

2. Assemble in the reverse order of disassembly.

3. Adjust the magnetic clutch clearance. (See MAGNETIC CLUTCH ADJUSTMENT.)

Bolt Removal/Installation Note

1. When removing or installing the bolt, hold the pressure plate in place as shown in the figure.

am3zzw00000806

2. When installing a new A/C compressor body, replace the recommended bolt.

1	Bolt (See Bolt Removal/Installation Note.)
2	Pressure plate
3	Shim
4	Snap ring (1) (See MAGNETIC CLUTCH DISASSEMBLY/ASSEMBLY[ZJ, ZY, Z6].)
5	A/C compressor pulley
6	Screw (See MAGNETIC CLUTCH DISASSEMBLY/ASSEMBLY[ZJ, ZY, Z6].)
7	Clamp (See MAGNETIC CLUTCH DISASSEMBLY/ASSEMBLY[ZJ, ZY, Z6].)
8	Snap ring (2) (See MAGNETIC CLUTCH DISASSEMBLY/ASSEMBLY[ZJ, ZY, Z6].)
9	Stator and thermal protector (See MAGNETIC CLUTCH DISASSEMBLY/ASSEMBLY[ZJ, ZY, Z6].)
10	A/C compressor body