SECURITY LIGHT 14, DTC B1602/P1260 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS SYSTEM)]

id0902e3801000

SECURITY LIGHT: 14	The keyless control module cannot read key ID number data normally.
DTC: B1602/P1260
DETECTION CONDITION	•  The keyless control module cannot read key ID number data normally.
POSSIBLE CAUSE	•  Transponder (key) malfunction •  Coil antenna malfunction •  Keyless control module malfunction •  Any of the following items are touching or near the key head. ―  Spare keys ―  Keys for other vehicles equipped with an immobilizer system ―  Any metallic object ―  Any electronic device, or any credit or other cards with magnetic strips

Diagnostic Procedure

STEP	INSPECTION		ACTION
1	VERIFY WHETHER KEY IS VALID OR NOT •  Using another registered key, turn the ignition switch to the ON position. •  If there is not another registered key, register an additional key using the M-MDS and turn the ignition key to the ON position using the registered key. (See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [ADVANCED KEYLESS SYSTEM].) •  Is the DTC displayed again? ―  Security light: 14 ―  M-MDS: B1602/P1260	Yes	Replace the coil antenna, then go to the next step. (See COIL ANTENNA REMOVAL/INSTALLATION [ADVANCED KEYLESS SYSTEM].)
		No	•  Dispose of the malfunctioning key. •  Register a new key if necessary. (See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [ADVANCED KEYLESS SYSTEM].)
2	INSPECT KEYLESS CONTROL MODULE •  Using another registered key, turn the ignition switch to the ON position. •  Is the DTC displayed again? ―  Security light: 14 ―  M-MDS: B1602/P1260	Yes	Replace the keyless control module and perform the resetting procedure for the immobilizer system when replacing the keyless control module. (See KEYLESS CONTROL MODULE REMOVAL/INSTALLATION [ADVANCED KEYLESS SYSTEM].) (See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [ADVANCED KEYLESS SYSTEM].)
		No	DTC troubleshooting completed.