NO.4 SYSTEM DOES NOT LOAD THE MAP DISC.[CAR-NAVIGATION SYSTEM]

• If dewdrops are formed inside of the car-navigation unit, the display screen shows the “The disc installed is not a map DVD” message. Remove the map disc, ventilate or remove moisture from the passenger compartment, and then leave it for approx. 1 h. The dewdrops will be removed and the car-navigation unit will operate normally.

• In case of a dirty/damaged map disc or car-navigation unit malfunction, the display screen will show the “Please insert a map DVD” message for few seconds to 1 min, then change to “The disc installed is not a map DVD” message after the ignition switch is turned to the ACC position.

• If a non-designated disc is inserted, the display screen shows the “The disc installed is not a map DVD” message.

STEP	INSPECTION	ACTION
1	• Eject the map disc. • Is the map disc okay?	Yes	Go to the next step.
No	Insert a designated disc, then go to the next step.
2	• Eject the map disc then insert it again. • Does the system load the map disc?	Yes	Troubleshooting is completed.
No	Go to the next step.
3	• Eject the map disc and clean the surface of map disc with a soft cloth. • Insert map disc again. • Does the system load the map disc?	Yes	Troubleshooting is completed.
No	Replace car-navigation unit and map disc at the same time. (consult distributor) (See CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.)

STEP

INSPECTION

ACTION

• Eject the map disc.

• Is the map disc okay?

Yes

Go to the next step.

Insert a designated disc, then go to the next step.

• Eject the map disc then insert it again.

• Does the system load the map disc?

Yes

Troubleshooting is completed.

Go to the next step.

• Eject the map disc and clean the surface of map disc with a soft cloth.

• Insert map disc again.

• Does the system load the map disc?

Yes

Troubleshooting is completed.

Replace car-navigation unit and map disc at the same time. (consult distributor) (See CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.)