CAR-NAVIGATION UNIT REMOVAL/INSTALLATION

id092000801000

1.  Disconnect the negative battery cable.

2.  Remove the decoration panel.(See DECORATION PANEL REMOVAL/INSTALLATION.)

3.  Remove the front scuff plate.(See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

4.  Remove the front side trim.(See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

5.  Remove the glove compartment.(See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

6.  Remove in the order indicated in the table.

am3zzw00003671

1	Nut
2	Connector
3	Car-navigation unit

7.  Install in the reverse order of removal.