FRONT FENDER PANEL REMOVAL/INSTALLATION

id091000801000

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Windshield wiper arm and blade (SeeWINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION.)

(2)  Cowl grille (SeeCOWL GRILLE REMOVAL/INSTALLATION.)

(3)  Front side turn lights (SeeFRONT SIDE TURN LIGHT REMOVAL/INSTALLATION.)

(4)  Front bumper (SeeFRONT BUMPER REMOVAL/INSTALLATION.)

(5)  Front combination lights (SeeFRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)

(6)  Side step molding (Vehicle with the side step molding) (SeeSIDE STEP MOLDING REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

am3zzw00002228

1	Fastener
2	Bolt A
3	Bolt B
4	Bolt C
5	Bolt D
6	Front fender panel

4.  Install in the reverse order of removal.