FRONT DOOR UNIT REMOVAL/INSTALLATION

id091100800500

1.  Remove the following parts:

(1)  Inner garnish (SeeINNER GARNISH REMOVAL/INSTALLATION.)

(2)  Regulator handle (vehicles with manual window system) (SeeREGULATOR HANDLE REMOVAL.) (SeeREGULATOR HANDLE INSTALLATION.)

(3)  Front door trim (SeeFRONT DOOR TRIM REMOVAL/INSTALLATION.)

(4)  Front beltline molding (SeeFRONT BELTLINE MOLDING REMOVAL/INSTALLATION.)

(5)  Front door glass (SeeREAR DOOR GLASS REMOVAL/INSTALLATION.)

(6)  Front door speaker (SeeFRONT DOOR SPEAKER REMOVAL/INSTALLATION.)

(7)  Rod protector (SeeFRONT DOOR KEY CYLINDER REMOVAL/INSTALLATION.)

2.  Remove the rod from the front outer handle and front door key cylinder.

3.  Disconnect the power outer mirror connector.

4.  Disconnect the front door wiring harness connector.

5.  Remove the tab, then remove the front door wiring harness bracket.

am3zzw00002245

6.  Remove screws A, B, and the fastener.

am3zzw00002246

7.  Remove the front door unit.

8.  Install in the reverse order of removal.