 |
am3zzw00002794
POWER WINDOW SUBSWITCH INSPECTION
id091200802200
1. M easure the voltage at each terminal (other than terminals G and H).
2. Disconnect the negative battery cable.
3. Inspect the power window subswitch connector for continuity at terminals G and H.
4. If the system does not work properly even though the inspection items or related wiring harnesses do not have any malfunction, replace the power window subswitch.
Terminal Voltage Table (Reference)
am3zzw00002794
|
|
Terminal |
Signal name |
Connected to |
Measured condition |
Voltage (V)/Continuity |
Inspection item(s) |
|---|---|---|---|---|---|
|
A
|
Pulse 1
|
Power window motor
|
Door glass moving
|
Alternates between 1.0 or less and B+.
|
• Power window motor (See POWER WINDOW MOTOR INSPECTION.)
• Related wiring harnesses
|
|
Door glass stopped
|
1.0 or less or B+
|
||||
|
B
|
Power supply
|
P/WIND R 30 A fuse (RH) P/WIND L 30 A fuse (LH)
|
Under any condition
|
B+
|
• P/WIND R 30 A fuse (RH) P/WIND L 30 A fuse (LH)
• Related wiring harnesses
|
|
C
|
Communication
|
Power window main switch
|
–
|
–
|
–
|
|
D
|
Close output
|
Power window motor
|
While door glass is opening
|
1.0 or less
|
• Power window motor (See POWER WINDOW MOTOR INSPECTION.)
• Related wiring harnesses
|
|
While door glass is closing
|
B+
|
||||
|
E
|
Pulse 2
|
Power window motor
|
Door glass moving
|
Alternates between 1.0 or less and B+.
|
• Power window motor (See POWER WINDOW MOTOR INSPECTION.)
• Related wiring harnesses
|
|
Door glass stopped
|
1.0 or less or B+
|
||||
|
F
|
Open output
|
Power window motor
|
While door glass is opening
|
B+
|
• Power window motor (See POWER WINDOW MOTOR INSPECTION.)
• Related wiring harnesses
|
|
While door glass is closing
|
1.0 or less
|
||||
|
G
|
Sensor ground
|
Power window motor
|
Under any condition: Inspect for continuity to ground.
|
Continuity detected
|
• Power window motor (See POWER WINDOW MOTOR INSPECTION.)
• Related wiring harnesses
|
|
H
|
GND
|
Body ground
|
Under any condition: Inspect for continuity to ground.
|
Continuity detected
|
• GND
|
|
I
|
Power supply
|
Power window motor
|
Ignition switch at ON
|
B+
|
• Power window motor (See POWER WINDOW MOTOR INSPECTION.)
• Related wiring harnesses
|
|
L
|
Power-cut signal
|
Power window main switch
|
Ignition switch at ON and power-cut switch at UNLOCK
|
B+
|
• Power window main switch (See POWER WINDOW MOTOR INSPECTION.)
• Related wiring harnesses
|