LOWER PANEL REMOVAL/INSTALLATION

id091700801100

1.  Disconnect the negative battery cable.

2.  Detach the bonnet release lever from the lower panel. (See BONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION[L.H.D.].) (See BONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION[R.H.D.].)

3.  Remove the front scuff plate. (Driver"s side) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

4.  Remove the front side trim. (Driver"s side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

5.  Remove the screw.

am3zzw00001880

6.  Pull the lower panel outward, and detach clips A and tab.

7.  Disconnect the panel light control switch connector and the headlight leveling switch connector.

8.  Remove the lower panel.

9.  Install in the reverse order of removal.