POWER BRAKE UNIT VACUUM SENSOR REMOVAL/INSTALLATION


id041100806000


L.H.D.

1.  Remove the battery. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)

2.  Remove in the order indicated in the table.

am3zzw00013714

1
Power brake unit vacuum sensor connector
2
Power brake unit vacuum sensor

3.  Install in the reverse order of removal.


R.H.D.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  For SKYACTIV-D 1.5 or SKYACTIV-D 2.2, perform the following procedure:

(1)  Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION.)
(2)  Remove the cowl grille. (See COWL GRILLE REMOVAL/INSTALLATION.)
(3)  Remove the windshield wiper motor and link. (See WINDSHIELD WIPER MOTOR AND LINK REMOVAL/INSTALLATION.)
(4)  Remove the keyless beeper. (With advanced keyless entry system) (See KEYLESS BEEPER REMOVAL/INSTALLATION.)
(5)  Remove the cowl panel. (See COWL PANEL REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

am3zzw00013715

1
Power brake unit vacuum sensor connector
2
Power brake unit vacuum sensor

4.  Install in the reverse order of removal.