FRONT BUMPER INSTALLATION

id091000804900

1.  Move the joint pipe in the direction of the arrow shown in the figure and connect it to the headlight cleaner motor. (With headlight cleaner system)

am3zzw00018793

2.  Install the wiring harness clips.

am3zzw00020560

3.  Connect the connectors.

4.  Press in the front bumper in the direction of the arrow shown in the figure and install the guide (RH).

am3zzw00018795

5.  Press in the front bumper in the direction of the arrow shown in the figure and install the guide (LH).

am3zzw00018796

6.  Press in the front bumper in the order of the arrows shown in the figure, and attach the front bumper hooks to the front bumper slider.

am3zzw00018797

7.  Install the fasteners.

am3zzw00018798

8.  Slightly bend back the front mudguard and install the screws.

am3zzw00019879

9.  Temporarily tighten the screws.

am3zzw00018800

10.  Adjust the front bumper position so that the clearance between the front bumper and the bonnet is within the standard clearance shown in the figure.

am3zzw00020561

11.  Completely tighten the screws tightened temporarily in Step 8.

am3zzw00018800

12.  Measure the clearance between the front bumper and the bonnet and verify that it is within the standard clearance shown in the figure.

am3zzw00020561

•  If not within the specification, repeat from Step 8 to Step 11 until the clearance between the front bumper and the bonnet is within the specification.

13.  Install the set plate. (See SET PLATE REMOVAL/INSTALLATION.)

14.  Install the bolts.

am3zzw00018802

15.  Partially peel back front under cover No.1 and install the fasteners first and then screws to the positions shown in the figure.

am3zzw00018803

16.  Insert the front under cover No.1 guide into the inner side of the front bumper.

am3zzw00019880

17.  Install the fasteners first and then screws to the positions shown in the figure.

am3zzw00018805

18.  Install the fasteners.

am3zzw00018806

19.  Install the screws.

am3zzw00018807

20.  Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)