REAR MAP LIGHT
id091800112700
Purpose
• The rear map light shines light at the center of the vehicle interior.
Function
• The rear map light illuminates when the room light switch for front map light is in the ON position.
• The rear map light illuminates according to the lock condition of the driver's door and open/close conditions of the doors under the rear body control module (RBCM) control when the room light switch for front map light is in the DOOR position.
Construction
• The rear map light is assembled to center area of the headliner.
Operation
-
Note
-
• When the rear body control module (RBCM) receives a lock signal on the remote transmitter with the ignition switched off and all doors/trunk (4SD)/liftgate (5HB) closed, it automatically turns the rear map light off.
Room light switch for front map light operation
-
ON position
-
1. Room light switch for front map light is in the ON position.
2. The battery current flows to the rear map light bulb from the rear body control module (RBCM).
3. The rear map light illuminates.
-
DOOR position
-
1. Room light switch for front map light is in the DOOR position.
2. When any door is opened, the door open signal is input to the rear body control module (RBCM).
3. When the rear body control module (RBCM) receives the door open signal, it turns on the transistor.
4. When the transistor turns on, the battery current flows to the rear map light bulb from the rear body control module (RBCM).
5. The rear map light illuminates.
-
Note
-
• When the room light switch for front map light is in the DOOR position, the rear map light illumination on/off timing is controlled by the room light control system. For details, refer to the "ROOM LIGHT CONTROL SYSTEM". (See
ROOM LIGHT CONTROL SYSTEM.)
Fail-safe
• Not applicable
