CENTER ACCESSORY SOCKET INSPECTION

id092100900900

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

2.  Remove the console-up. (See REAR CONSOLE REMOVAL/INSTALLATION.)

3.  Remove the center accessory socket. (See CENTER ACCESSORY SOCKET REMOVAL/INSTALLATION.)

4.  Connect the tester probe to the position shown in the figure and verify that there is continuity.

am6zzw00008240

•  If it cannot be verified, replace the center accessory socket.